TestHonker Skid and Trailer Mounted; 53’ Double Drop King Pin Trailer
Safety Features:
High/Low Level Switches
Pressure Pilots
Pressure Relief Valves with In-Service Test Device
Complete Process Piping Including:
Redundant Dumps
Redundant Fuel Gas Train
Measurement Equipment:
4” Orifice Gas Measurement –Junior Meter Run
2” Liquid Turbine Meters with Full Bypasses
B-SKO: Sand Traps
B-SKO Overview
This process is crucial as it protects the integrity of the production equipment downstream. BOLD’s sand trap fleet ranges from 16” to 41” OD, 5,800# – 10,000# in size and includes Conventional and Cyclonic options.
The Bold Advantage
Safety
- Annual UT/PSV Recertification Program
- Pressure Relief Valves with In-Service Test Device
Modular Design/Value Adds
- Built on L-shaped structural skid
- Engineered internals allow for more effective separation
- Conventional and Cyclonic
- Pipe spools and adjustable choke on the blow down available
- Sand Trap Trailer (Optional)
Operations/Engineering
- Complimentary Start up and commissioning services
- 24/7/365 field service support/troubleshooting
- PFD and engineering support
- Performance curves available
Pintail 5k Gallery
NACE 5K Sand Trap
- 20”x 8’
- L-Shaped Skid
- 2” Inlet/Gas Outlet/Drain
- Bypass
- Relief Valve
Pintail 6K Gallery
NACE 6K Sand Trap
- 24”x 8’
- L-Shaped Skid
- 2” Inlet/Gas Outlet/Drain
- Adjustable Choke on the Blowdown
- Pipe Spools
- Relief Valve
Teal 10K Gallery
NACE 10K Sand Trap
- 16”x 11’
- L-Shaped Skid
- 3” Inlet/Gas Outlet/Drain
- Bypass
- Relief Valve
Teal Cyclonic 10K Gallery
NACE 10K Cyclonic Sand Trap
- Skid and Trailer Mounted
- Small Foot Print: Less Than 1 Hour Rig up/Rig Down Time
- 3 Times More Capacity vs. Cylindrical Systems
- No Sacrificial Baffle Plate, Works on Patented Centrifugal Action
- Skid Mounted or Trailer Mounted
- Permanent or Temporary Installations
- Capable of Replacing: Plug Catcher, Sand Filter, Choke Manifold in One Package
- Flexible Design for Use on Multi Well Pads from Flowback Through Well Testing and Production
B-Hot: Flare Stacks
B-Hot Overview
A Flare Stack is an elevated vertical stack used for burning unusable waste gas in a variety of oil and gas production applications. The gas flaring process typically takes place when it is uneconomical to retain the waste gas. BOLD’s Flare Stacks are trailer mounted and equipped with hydraulic assist. Our units are NACE compliant, 6” x 60’ in size and furnished with a 25 MMSCF/D Standard Burner Tip.
The Bold Advantage
Safety
- NACE Compliant
Modular Design/Value Adds
- Hydraulic Lift; Trailer Mounted
- Integrated Knockout Pot
- Electric Ignitor
- Dual Connections
- Quad O Compliant Smokeless Tip and Standard Tip available
Operations/Engineering
- Complimentary Start up and commissioning services
- 24/7/365 field service support/troubleshooting
- PFD and engineering support
- Performance curves available
Product Gallery
B-Heat: Line Heaters
B-Heat Overview
Line Heaters are used with high-pressure natural gas streams to counteract the cooling effect when the gas pressure is reduced to sales line Pressure or needed pressure. The reduction in pressure causes a Joule-Thomson (JT) effect. The JT effect causes rapid cooling of the gas stream, which can result in hydrate formation. Line Heaters can also be used to heat and stabilize oil to aid in separation and fluid movement.
The Bold Advantage
Safety
- Annual UT/PSV Recertification Program
- Heater is packaged in accordance with ASME B31.3
- Process coil is sour service ready
- Level safety low
- High temp shut down
- Telemetry (Optional)
Modular Design/Value Adds
- Unit is skid mounted & self-contained
- 22 pass cushion coil system, 4”, 6,000#
- Burner management system with electronic ignition for safe operations
- Includes expansion tank, removable fire tube & hinge stack
- Burner runs on fuel gas or propane supply
Operations/Engineering
- Complimentary Start up and commissioning services
- 24/7/365 field service support/troubleshooting
- PFD and engineering support
- Performance curves available
B-Four: 4 Phase Production Separator
B-Four Overview
Production Separators have the full ability to separate and effectively measure gas, oil, water, and solids.
BOLD’s 4 phase production separators are built on a containment skid and trailer mounted with the ability to remove the asset from the trailer for permanent applications. Our vessels range from 30” to 94” OD and 150# to 2,000# in size and have fully flanged versus threaded pipe.
The Bold Advantage
Trailer Mounted with Containment Pans
Safety Features
- Annual UT/PSV Recertification Program
- Pressure Relief Valves with In-Service Test Device
- High/Low Level Switches
- Pressure Pilots
- Telemetry Package (Optional)
Mobile Design/Value Adds
- Trailer Mounted with Containment Pans
- Advanced Engineered Internals for Effective Separation
- Redundant Dumps, Redundant Fuel Gas Trains, Manifold Systems
Operations/Engineering
- Complimentary Start up and commissioning services
- 24/7/365 field service support/troubleshooting
- PFD and engineering support
- Performance curves available
Albatross Gallery
NACE 1,440# 60″ x 20′ 4 Phase Separator
Mobile Design
- Skid and Trailer Mounted; 53’ Double Drop King Pin Trailer
Safety Features:
- High/Low Level Switches
- Pressure Pilots
- Pressure Relief Valves with In-Service Test Device
Complete Process Piping Including:
- Redundant Dumps
- Redundant Fuel Gas Train
Measurement Equipment:
- 4” V-Cone Gas Measurement – Senior Meter Run
- 2” Liquid Turbine Meters with Full Bypasses
Honker Gallery
NACE 720# 72”x 20’ 4 Phase Separator
Mobile Design
- Skid and Trailer Mounted; 53’ Double Drop King Pin Trailer
Safety Features:
- High/Low Level Switches
- Pressure Pilots
- Pressure Relief Valves with In-Service Test Device
Complete Process Piping Including:
- Redundant Dumps
- Redundant Fuel Gas Train
Measurement Equipment:
- 4” V-Cone Gas Measurement – Senior Meter Run
- 2” Liquid Turbine Meters with Full Bypasses
Spoony Gallery
NACE 275#/1,440# 48”x 20’ 4 Phase Separator
Mobile Design
- Skid and Trailer Mounted; 53’ Double Drop King Pin Trailer
Safety Features:
- High/Low Level Switches
- Pressure Pilots
- Pressure Relief Valves with In-Service Test Device
Complete Process Piping Including:
- Redundant Dumps
- Redundant Fuel Gas Train
Measurement Equipment:
- 4” V-Cone Gas Measurement – Senior Meter Run
- 2” Liquid Turbine Meters with Full Bypasses
Woody Gallery
NACE 1,440#/2,000# 36”x 15’ 4 Phase Separator
Mobile Design
- Skid and Trailer Mounted; 32’ Gooseneck Trailer
Safety Features:
- High/Low Level Switches
- Pressure Pilots
- Pressure Relief Valves with In-Service Test Device
Complete Process Piping Including:
- Redundant Dumps
- Redundant Fuel Gas Train
- Built in Manifold System (co-mingling)
Measurement Equipment:
- 4” V-Cone Gas Measurement – Senior Meter Run
- 2” Liquid Turbine Meters
Khaki Gallery
NACE 1,440# 30”x 15’ 4 Phase Separator
Mobile Design
- Skid and Trailer Mounted; 32’ Gooseneck Trailer
Safety Features:
- High/Low Level Switches
- Pressure Pilots
- Pressure Relief Valves with In-Service Test Device
Complete Process Piping Including:
- Redundant Dumps
- Redundant Fuel Gas Train
Measurement Equipment:
- 2” V-Cone Gas Measurement
- 2” Liquid Turbine Meters
Thunder Woody
NACE 250# 94”x 34’ 4 Phase Separator
Mobile Design
- Frac Tank Style Trailer
Safety Features:
- High/Low Level Switches
- Pressure Pilots
- Pressure Relief Valves with In-Service Test Device
Complete Process Piping Including:
- Redundant Dumps
- Redundant Fuel Gas Train
Measurement Equipment:
- 4” V-Cone Gas Measurement
- 3” Liquid Turbine Meters
B-Clean: Filter Separators
B-Clean Overview
Filter Separators protect the integrity of the gas treating applications downstream of compressors, glycol dehydration units, fuel gas applications. This vessel is designed to remove particulates from natural gas streams. BOLD’s fleet contains a variety of high-pressure filter separators.
The Bold Advantage
Containment Skid and Trailer Mounted; 32’ Gooseneck Trailer
Safety Features
- Annual UT/PSV Recertification Program
- Pressure Relief Valves with In-Service Test Device
- High/Low Level Switches
- Pressure Pilots
- Telemetry Package (Optional)
Mobile Design/Value Adds
- Built on Containment Skids and Trailer Mounted
- Advanced Engineered Internals for Effective Separation
- Redundant Dumps, Redundant Fuel Gas Trains, Manifold Systems
Operations/Engineering
- Complimentary Start up and commissioning services
- 24/7/365 field service support/troubleshooting
- PFD and engineering support
- Performance curves available